It was designed by NOVATAR AGRICULTURAL MACHINE, which has been the pioneer of the loader industry for 40 years and first comes to mind when it comes to quality and durability. With the quality of production in European standards, we produce for you without compromising on quality and honest trade. The front loaders are mounted on a chassis installed on top of the tractors and are usually powered by the tractor's own hydraulic pump. He is your greatest helper in farms, forestry and construction. ADS (Active Balancing System) is available in all our models.
WHAT IS ADS?
The active balancing system is used to remove the attachment connected to the loader at the same angle. Critical to the front loader, this system works fully on Novatar front loader models.
-Provides more collection angle to the bucket.
-Provides more unloading angle
-Prevents the attachment from getting jammed during downloading or lifting up.
-Prevents fatigue, breakage and wear over time or in a short time without burdening the chassis.
-Extends life by not giving unnecessary load to pistons
-Hydraulic hoses and valve does not give unnecessary load.
-The operator do not need to correct the attachment for downloads and removals.
-Even if the operator changes, there is nothing to pay attention to.
-Prevents the load on the bucket or attachment from spilling on the tractor while it is at the top.
-Allows to take roll bales horizontally or vertically in the desired position.
-These tubes allow stretching by absorbing impacts.
-It does suspension duty on broken or rugged surfaces, thus preventing damage to the body and loader connections by not loading tractor connections.
-With the joystick one-armed controller, you can do both lifting and lowering, attachment movements and 3rd attachment movement (Such as bucket on and off, bale opening and closing) with one arm.
We offer many attachment support for different jobs. For example, if you want to create Roll bale attachment, square bale attachment, log loading attachment, big-bag attachment, pallet lifting attachment, pop-up bucket, beet bucket with elevator, grain buckets, grain buckets with elevator, work buckets and custom production attachments according to your need...
The possibility of quick attachment replacement (3 min.) is also offered as standard in all our models.
Other features that make novatar good quality;
-Italian flat forehead quick caplins (jacks) are using.
-We use bronze bearings that prevent wear on pin bearings.
-Easy separation from tractor (3 min.) is offered as standard.
A-Bearing center 158 cm.
B-Boom center 231 cm.
C-Attachment collection angle at the top point 45°
D-Discharge angle at all heights 90°
E-Maximum lifting height (from the bottom of the attachment) 380 cm
F-Maximum lifting height (from perno center) 395 cm
G-Ground attachment collection angle 52°
H-Depth plunge distance from floor to 20 cm
K-Upper point attachment discharge height Lifting capacity 300 cm (vary by tractor) 1800 kg
-Non-attachment loader weight 700 kg -ADS (Active balancing system) standard
-Joystick control system standard
-Easy separation from tractor standard
-Easy attachment replacement adapter standard
-Acculator (suspension) standard
-Required tractor power 65-130 hp
-Admiral series is for field type 4x4 tractors from 65-130 Hp.
-ADS (Active balancing system) is offered as standard.
NOTE: Also for videos, our YOUTUBE account is: "OĞUZYİGIT & NOVATAR AGRICULTURAL ENGINEERS".
NOVATAR IS A Trademark of OGUZYİGIT AGRICULTURAL MACHINERY. FACEBOOK: Novatar Agricultural Machinery